Tipos de bridas (typ) según DIN EN 1092-1
| Typ 01: Plate (slip-on) flanges for welding |
Typ 13: Hubbed threaded flanges |
| Typ 02: Loose plate flanges with weld-on plate collar |
Typ 21: Integral flanges |
| Typ 04: Loose plate flanges with weld-neck collar |
Typ 32: Weld-on plate collars |
| Typ 05: Blank (blind) flanges |
Typ 33: Lapped pipe ends |
| Typ 11: Weld-neck flanges |
Typ 34: Weld-neck collars |
| Typ 12: Hubbed slip-on flanges for welding |
|
D: Diámetro exterior
K: Diámetro Círculo taladros
L: Diámetro taladros |
|
A: Diámetro exterior del cuello
E: Chaflán
F: Grosor del Collar |
|
G max: Diámetro de apoyo
R: Radio Córner
N: Diámetro cuello
S: Espesor cuello |
| DN |
Dimensiones acoplamiento |
A |
Espesor Brida |
Longitud |
Diámetros
del cuello |
R1 |
S |
| D |
K |
L |
Taladros |
| No |
Size |
C2 |
C3 |
H2 |
H3 |
N1 |
N3 |
| Tipo Bridas |
| 11, 21 |
11
21* |
11 |
21 |
11 |
11 |
11 |
21 |
11 |
21 |
11 |
| 10 | 125 | 85 | 18 | 4 | M16 | 17.2 | 28 | 28 | 65 | 8 | 48 | 48 | 4 | 4 | 3.6 |
| 15 | 145 | 100 | 22 | 4 | M20 | 26.9 | 30 | 30 | 68 | 8 | 56 | 57 | 4 | 4 | 5.0 |
| 25 | 180 | 130 | 26 | 4 | M24 | 42.4 | 38 | 38 | 90 | 10 | 82 | 81 | 4 | 5 | 7.1 |
| 40 | 220 | 165 | 30 | 4 | M27 | 60.3 | 48 | 48 | 110 | 12 | 106 | 105 | 6 | 5 | 10.0 |
| 50 | 235 | 180 | 30 | 8 | M27 | 76.1 | 52 | 52 | 120 | 15 | 120 | 120 | 6 | 6 | 12.5 |
| 65 | 290 | 225 | 33 | 8 | M30 | 101.6 | 64 | 64 | 135 | 18 | 158 | 158 | 6 | 6 | 16.0 |
| 80 | 305 | 240 | 33 | 8 | M30 | 114.3 | 68 | 68 | 150 | 20 | 174 | 174 | 8 | 8 | 17.5 |
| 100 | 370 | 295 | 39 | 8 | M36 | 139.7 | 80 | 80 | 175 | 25 | 216 | 216 | 8 | 8 | 22.2 |
| 125 | 415 | 340 | 39 | 12 | M36 | 193.7 | 92 | 92 | 200 | 30 | 258 | 259 | 8 | 10 | 30.0 |
| 150 | 475 | 390 | 42 | 12 | M39 | 219.1 | 105 | 105 | 225 | 35 | 302 | 302 | 10 | 10 | 35.0 |
| 200 | 585 | 490 | 48 | 16 | M45 | 273.0 | 130 | 130 | 280 | 40 | 388 | 388 | 10 | 10 | 40.0 |
* For flanges type 21 the outside hub diameter approximately corresponds to the outside pipe diameter.
