| ASTM | EN | DIN | W n° | Re
(MPa) |
| A-216 WCA | | |
| A-216 WCB | EN 10213-2 GP240GH | GS C-25 | 1.0619 | 240 |
| EN 10213-2 GS20Mn5 | GS-20Mn5V | 1.6220 | 300 |
| A-216 WCC | DIN 1681 GS45- | |
Normas de fundicion de acero al carbono en válvulas
ASTM A216 / A216M - 08
Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
This specification covers carbon steel castings for valves, flanges, fittings, or other pressure-containing parts for high-temperature service
and of quality suitable for assembly with other castings or wrought-steel parts by fusion welding. Covered here are three grades of carbon steel (Grades WCA, WCB, and WCC),
the selection of which shall depend on the design and service conditions, mechanical properties, and the high temperature characteristics. Castings shall be heat treated and furnished,
as appropriate to their design and chemical composition, in the annealed, or normalized, or normalized and tempered conditions after they have been allowed to cool below the transformation range.
Furnace temperatures for heat treating shall be effectively controlled by pyrometer. Steel castings shall adhere to chemical composition and tensile property requirements, which include tensile strength,
yield strength, elongation, and reduction of area. The surface of castings shall be free of adhering elements such as sand, cracks, hot tears, and other discontinuities, and as such be repair welded when judged appropriate.
